Send Location to Peer/on PTT |
(Conventional System, Features) |
ASTRO
system enables a transmitting radio to encode its location coordinates
in its ASTRO voice transmissions
in a manner similar to PTT ID
(see also Display
Peer Location). 
This feature operates
when Scan Mode is active;
therefore, the radio encodes its location coordinates when transmitting
in landed scan mode. This
selection applies for the current Conventional
System.
DVRS system enables APX radios to transmit the GPS location to infrastructure through voice frames on the voice channel after PTT operation, so that their location can be seen on the mapping application.
|
ARS Mode must be set as "Enhanced Server" in the Data Profile record to prevent invalid Fields Report when System Type is DVRS. |
|
In ASTRO system , the radio-to-radio voice transmissions support encoding the location coordinates in the voice stream; in other words, Conventional Pages and Selective Calls support Display Peer Location, however, DVRS, phone mode and other infrastructure-dependent features do not support Display Peer Location. In DVRS system, the radio-to-infrastructure voice transmission supports encoding the location coordinates in the voice stream. |
|
If location coordinates
are not
obtainable from the radio's GPS receiver (either because the GPS
signal is disrupted in some way, or
User Selectable Location Enable
is enabled and
the radio-user has turned OFF the GPS feature with |
|
If the update interval since the last-saved location coordinates exceeds an internal timer, then the radio marks the location coordinates in the voice stream as being "stale"; if there are no saved location coordinates, the radio sends the voice stream without any location data. |
When the radio is model / option capable, and
when the System Type field is set to "ASTRO", and
when the System Type field is set to "DVRS", and ARS Mode is "Enhanced Server" in its Data Profile, and
when the Location Enable field is enabled.
